|
|
Induction Heating Control Unit
Válik, Martin ; Čožík, Ondřej (referee) ; Macháň, Ladislav (advisor)
The text is focused on development induction heating coltroller. The motivation to create such a device was to correct deficiencies and add the necessary functionality for a device of this type. This was achieved mainly by adding the graphic display and USB interface. Graphic TFT display with buttons and a rotary encoder creates user interface. Part of the control unit is also circuit evaluateing temperature from three thermocouples. The paper dealt with the optimal solution for power supply, communication between control unit and power part, way of controlling graphical TFT display and selection of other components. The core is of course, suitable microcontroller, which manage all parts of the device.
|
|
|
USB miltimeter with microprocessor
Samek, Martin ; Kolka, Zdeněk (referee) ; Kovář, Jan (advisor)
Topic of my terminal labour is a proposion of multimeter and its resulting connection by the help of bus USB. When proposing the multimeter there was a tendency to use a minimal number of component parts to conserve a good protection against a bad usage in application. The most widespread busbar USB is used for connection of the multimeter and a computer. Standard HID is used for communication, for that it is not neccessary to install any system drivers.
|
|
|
Measurement module with simultaneous-sampling A/D converter
Křížek, Miroslav ; Beneš, Petr (referee) ; Havránek, Zdeněk (advisor)
In this work is designed programme unit for acquisition analog acoustic signlas from sensors. There is used accurate A/D converter ADS1287 by the company Texas Iinstrument with resolution of 24 bits to digitizing these signals. There is used 32-bit microprocessor AT91SAM7S64 by the company Atmel to control this A/D converter and sending digitized data to PC. This microprocessor has implemented USB interface. By force of developmental programme units whit microprocessor and A/D converter is produced programme for microprocessor in developmental setting IAR Embedded Workbench IDE 5.0 and simple aplication for PC in setting Borland C++ Builder. Both of those programs are in language C++. Rate of sampling is 26 kHz. On the basis is realized programme unit USB-ADC whit microprocessor and A/D converter.
|
|
|
BER Meter for Video Signals
Šimoník, Petr ; Frýza, Tomáš (referee) ; Říčný, Václav (advisor)
The diplomma thesis is dealing with possibilities of Signal to noise ratio measurement by method, which is based on direct measurement. It is chosen the most suitable method – signal and noise separation to two different parallel signal branches, where is measured signal strength in one branch and root mean square value in the other. The thesis is consisted of a concept of detail block scheme of Signal to noise ratio meter, which was designed in terms of theoretical knowledge. Particular functional blocks were circuit-designed, the active and passive parts were chosen and their function were described. There were made simulation and displayed input and output time flows. There is designed the whole connection of engineered Signal to noise ratio meter in the last part of my thesis. The double-sided board of printed circuit is contained too. It was created simple programme for supervisor micro-processor. Thereby were constructed complete bases for realization.
|
|
|
Oscilloscope module with wireless data transmission
Kočík, Karol ; Svoboda, Vít (referee) ; Havlíková, Marie (advisor)
The aim of the thesis is the design and realization of the oscilloscope module with wireless data transfer. One part of the thesis is a short overview of the different types of AD converters. The main part is focused on the hardware configuration that allows modification of the wireless module of the oscilloscope, and the possibility of using in the industrial zone. The design takes into account reducing of consumption and EMC compatibility.
|
|
|
Programmable load
Koleček, Jan ; Fujcik, Lukáš (referee) ; Pavlík, Michal (advisor)
The diploma thesis deals with the design of a programmable load. As first, the research of available commercial devices was made in the theoretical part. Based on this research, the design possibilities of programmable load were discussed. As next, the design of resistor network was made, using a computer program that was developed for this purpose. Practical part deals with a realization of module of load, control board and software development. Proposed system consists of control board and ten modules. Modules have floating input terminals. This approach facilitate to arbitrary combination of their inputs. Modules are designed to work with DC and AC power supplies.
|
|
|
Receiver for remote control
Zdařil, Tomáš ; Kubíček, Michal (referee) ; Kolka, Zdeněk (advisor)
This bachelor’s thesis deals with design and construction facilities that will serve as the receiving module of infrared remote control.This modul will be controlled by the direction of rotation of antenna rotator.Part of this work is theoretical analysis of the issue.It also includes information on selection of appropriate components,primarily for the control microcontroller involvement and thein description of the overall wiring diagram.In the practical part contained information on the construction of this facility,including all documentation and set up the program for the microcontroller that is included on the enclosed CD.At the end of the dokument is a summary of the results of the work.
|
|
|
Programmable load
Koleček, Jan ; Fujcik, Lukáš (referee) ; Pavlík, Michal (advisor)
The diploma thesis deals with the design of a programmable load. As first, the research of available commercial devices was made in the theoretical part. Based on this research, the design possibilities of programmable load were discussed. As next, the design of resistor network was made, using a computer program that was developed for this purpose. Practical part deals with a realization of module of load, control board and software development. Proposed system consists of control board and ten modules. Modules have floating input terminals. This approach facilitate to arbitrary combination of their inputs. Modules are designed to work with DC and AC power supplies.
|
|
|
Induction Heating Control Unit
Válik, Martin ; Čožík, Ondřej (referee) ; Macháň, Ladislav (advisor)
The text is focused on development induction heating coltroller. The motivation to create such a device was to correct deficiencies and add the necessary functionality for a device of this type. This was achieved mainly by adding the graphic display and USB interface. Graphic TFT display with buttons and a rotary encoder creates user interface. Part of the control unit is also circuit evaluateing temperature from three thermocouples. The paper dealt with the optimal solution for power supply, communication between control unit and power part, way of controlling graphical TFT display and selection of other components. The core is of course, suitable microcontroller, which manage all parts of the device.
|
|
|
Small digital oscilloscope
Mitáš, Daniel ; Bohrn, Marek (referee) ; Pavlík, Michal (advisor)
This project deals with a design and prototyping of personal computer-based digital storage oscilloscope and its control software. Oscilloscope module communicates with installed control software touch the Universal Serial Bus interface. Oscilloscope module contains 2 analog and 22 digital inputs.
|
guest ::
